Isolation,purification, and antioxidant activities of polysaccharides from Ziziphus Jujuba cv. Muzao

In the present study, crude polysaccharides from Ziziphus Jujuba cv. Muzao were isolated and purified using DEAE cellulose-52 and Sephadex G-100 size-exclusion chromatography; four fractions were collected, namely GZMP-1, GZMP-2, GZMP-3, and GZMP-4. The molecular weights of these four fractions were measured to be 111.2, 95.1, 84.2, and 571.4 kDa, respectively, using high-performance gel permeation chromatography. Gas chromatography analysis of the monosaccharide composition confirmed that GZMP-1 was composed of rhamnose, arabinose, glucose, and galactose. Rhamnose, arabinose, and galactose were the main components present in GZMP-2 and GZMP-3, whereas GZMP-4 was composed of only rhamnose and arabinose. Scanning electron microscopy showed relatively smooth surfaces for GZMP-1 and GZMP-4, whereas GZMP-2 and GZMP-3 had more folds on their surfaces. Fourier transform infrared spectroscopy analyses indicated that GZMP-1 and ZMP mainly had α-type glycosidic linkages. The in vitro antioxidant activities of the polysaccharides revealed that jujube polysaccharides exhibit remarkable antioxidant activity, and can scavenge DPPH radical and OH radical in a concentration-dependent manner. The results of this work suggest that polysaccharides from Z. Jujuba cv. Muzao have potential to be used as functional food and in the development of natural antioxidant drug carriers.     

Reservoir characterization and volumetric estimation of Orok Field,Niger Delta hydrocarbon province

Geophysical analysis was undertaken on the available suit of well logs, 3D seismic and checkshot data from the field in a view to carrying out reservoir characterization and volumetric estimation of Orok Field Niger Delta Province. Lithology delineation and Petrophysical evaluation including porosity, water saturation and net-to-gross were undertaken. Well to seismic tie, structural interpretation and horizon mapping were carried out. Time and depth maps were generated and volumetric estimation of the reservoirs were carried out. Four gas-bearing reservoir (A001, B001, C001 and D001) of variable thickness and depth from the subsurface were identified. Their effective porosity ranges from 19% for A001, 20% for B001, 20% for C002 and 18% for the basal D001 respectively. Water saturation estimated from the reservoir sands ranges from 23% for A001, B001 20%, C001 12% and 10% for D001. The hydrocarbon saturation of the reservoirs stood at 77%, 80%, 82%, 90% for A001, B001, C001 and D001 respectively. Only sand A001 and sand B001 had good seismic tie and were able to be mapped through the seismic. Three synthetic structural building listric faults were interpreted across the inlines intercepting the top of reservoir Sand A001 and B001. The volumetric estimation reveals that A001 and B001 have an area of 813.708 acres and 813.693 acres and volume of 151?billion cu.ft and 286?billion cu.ft of gas respectively. Three synthetic structural building listric faults (F1, F2 and F3) intercept the top of sandstones A001 and B001. The structural trapping mechanism in both sandstones resulted from synthetic fault assisting structures i.e rollover anticlines. The modeled faults trends approximately northwest to southeast direction and dip in the southwest direction.     

Assessing smoke toxicity of burning combustibles by four expressions for fractional effective dose

Toxicity of smoke generated in a fire is difficult to measure accurately. That is because gas sensors for measuring rapidly varying concentrations of toxic gases are not yet developed. Simple expressions are searched for quick measurement in assessing smoke toxicity practically. Four equations on calculating fractional effective dose (FED) related to toxic effluents were reported in the literature, each based on different assumptions. FED value was proposed to be calculated based on peak carbon monoxide concentration and peak carbon dioxide concentration, and transient carbon monoxide, carbon dioxide, and oxygen concentrations. The four values were compared in this article using literature data on toxic gases from different materials measured by (i) cone calorimeter; (ii) full-scale burning tests; and (iii) tunnel full-scale tests. Measured carbon monoxide, carbon dioxide, and oxygen concentrations by standard equipment of oxygen consumption calorimeters were used to calculate the four FED values. It is found that the values of FED based on peak carbon monoxide and carbon dioxide concentrations (denoted as FED₂) are similar to the average values of FED calculated from the updated equation in the literature using the oxygen consumption calorimeters. Putting the values of FED₂ in fire safety design guides is then recommended.     

Synergistic fire-retardancy properties of melamine coated ammonium poly(phosphate) in combination with rod-like mineral filler attapulgite for polymer-modified bitumen roofing membranes

A novel intumescent (carbonization, acid donor and foaming) fire retardant that mimics carbon nanotubes was introduced into bitumen roofing and characterized using cone calorimetry as the main analytical tool. The experimental results indicate that 18% (by mass) attapulgite mineral (ATTP) mixed with base bitumen decreased the peak heat release rate per unit area (pHRRPUA) by 10%. Further, incorporation of melamine coated ammonium polyphosphate (MAPP) decreased the pHRRPUA by 52% and a mixture of these (3:1, ATTP:MAPP) decreased the pHRRPUA by 25% as compared to adding CaCO₃ as a filler. The residual mass loss after the cone test was also improved with up to 3%. The indication of a positive synergistic flame retardant effect of the ATTP-MAPP mixture is supported by thermogravimetric analysis. The addition of this rod-like mineral improved the general fire retardant properties of the base bitumen and increased the viscosity. Therefore, the polymer-modified bitumen with both fire retardant and rheological properties (providing mechanical strength) is a promising novel approach in the design of bitumen roofing membranes.     

Thermal and transport properties of as-grown Ni-rich TiNi shape memory alloys

Electrical resistivity, Seebeck coefficient, specific heat and thermal conductivity measurements on the Ti_50−xNi_50+x (x = 0.0–1.6 at.%) shape memory alloys are performed to investigate their thermal and transport properties. In this study, anomalous features are observed in both cooling and heating cycles in all measured physical properties of the slightly Ni-rich TiNi alloys (x ≤ 1.0), corresponds to the transformation between the B19′ martensite and B2 austenite phases. Besides, the transition temperature is found to decrease gradually with increasing Ni content, and the driving force for the transition is also found to diminish slowly with the addition of excess Ni, as revealed by specific heat measurements. While the signature of martensitic transformation vanishes for the Ni-rich TiNi alloys with x ≥ 1.3, the characteristics of strain glass transition start to appear. The Seebeck coefficients of these TiNi alloys were found to be positive, suggesting the hole-type carriers dominate the thermoelectric transport. From the high-temperature Seebeck coefficients, the estimated value of Fermi energy ranges from ∼1.5 eV (Ti_48.4Ni_51.6) to ∼2.1 eV (Ti₅₀Ni₅₀), indicating the metallic nature of these alloys. In addition, the thermal conductivity of the slightly Ni-rich TiNi alloys with x ≤ 1.0 shows a distinct anomalous feature at the B19′ → B2 transition, likely due to the variation in lattice thermal conductivity.     

Solid-state additive manufacturing for metallized optical fiber integration

The formation of smart, Metal Matrix Composite (MMC) structures through the use of solid-state Ultrasonic Additive Manufacturing (UAM) is currently hindered by the fragility of uncoated optical fibers under the required processing conditions. In this work, optical fibers equipped with metallic coatings were fully integrated into solid Aluminum matrices using processing parameter levels not previously possible. The mechanical performance of the resulting manufactured composite structure, as well as the functionality of the integrated fibers, was tested. Optical microscopy, Scanning Electron Microscopy (SEM) and Focused Ion Beam (FIB) analysis were used to characterize the interlaminar and fiber/matrix interfaces whilst mechanical peel testing was used to quantify bond strength. Via the integration of metallized optical fibers it was possible to increase the bond density by 20–22%, increase the composite mechanical strength by 12–29% and create a solid state bond between the metal matrix and fiber coating; whilst maintaining full fiber functionality.     

Monotonic and cyclic behaviour of isolated FRP anchors loaded in shear

Using anchors made of fibre reinforced polymers (FRP) is an increasingly accepted method to delay the delamination of FRP sheets from the concrete surface and to enhance the capacity of FRP strengthened concrete structures. For many applications, FRP anchors are primarily loaded in shear. When used for seismic retrofitting schemes, the anchors are subjected to cyclic loads which may lead to premature fatigue failure. To date, however, shear strength of FRP anchors has experienced much less attention than their tension resistance. This paper documents tests on isolated FRP anchors which were conducted to determine the seismic shear capacity of FRP anchors and to propose design rules. To this end, a test setup was developed which allows direct and reverse loading of FRP anchors.     

Pairing effect and tensile properties of laminated high-performance hybrid composites prepared using carbon/glass and carbon/aramid fibers

Many attempts have been made to fabricate lightweight, high-performance, and low-cost polymeric composites. To improve the mechanical performance of the same material compared to conventional composites, paired hybrid materials were manufactured with different lamination structures. Each of six types of hybrid composite was designed by lamination pairing of carbon/aramid fabric and carbon/glass fabric using VARTM. The dependence of the mechanical properties of the samples on the pairing effects of the lamination structures was investigated. All pairing materials did not lead to a large increase of tensile strength due to the domination of carbon fiber, but the mechanical properties of specific laminates were clearly changed by the particular pairing sequence used. Using the limited material, the design of an effective structure was the central laminating condition with a good tensile and bending properties. Laminating position of the carbon fiber was found to play an important role in the stacking design of hybrid composites.     

Homogenization with uncertainty in Poisson ratio for polymers with rubber particles

The main aim of this work is dual computer analysis of probabilistic coefficients for the homogenized tensor of the polymer filled with the rubber particles having randomized Poisson ratios of both constituents. The major issue is to verify an influence of a randomness in rubber Poisson ratio close to the compressibility limit on the uncertainty of the effective tensor probabilistic characteristics. Probabilistic analysis presented here is carried out using mainly the stochastic perturbation technique provided by the common application of the traditional FEM commercial code ABAQUS and the symbolic computations package MAPLE. This FEM-based technique employs polynomial response function of the optimum order recovered from the weighted least squares method and following a set of deterministic solutions obtained for various values of the randomized input parameter. Optimization procedure is released entirely into a symbolic environment, where maximization of the correlation factor together with minimization of the fitting variance and approximation error are applied. Homogenization technique consists in equating of deformation energies for the real composite and the artificial one characterized by the effective elasticity tensor with uncertainty.     

Dynamic mechanical analysis and thermal properties of LLDPE/EVA/modified silica nanocomposites

The effect of hexamethylene disilazane modified nanosilica on the dynamic mechanical analysis (DMA), crystallization, melting and thermal degradation behavior of linear low density polyethylene/ethylene vinyl acetate copolymer (LLDPE/EVA) blends are explored.Detailed DMA analysis is carried out in order to investigate the reinforcing behavior of nanosilica adopting Kerner–Nielson model. Oxidative degradation and thermal stabilities of samples are also studied by the thermogravimetery analysis. The high content of nanosilica particles results in significant shift of degradation temperature to higher temperatures in the oxygen atmosphere. This behavior might be attributed to the barrier properties of nanoparticles against oxygen and gaseous degradation products. However, incorporation of modified nanosilica into LLDPE/EVA blend is decreased the onset of degradation temperature of the unfilled system. In nitrogen atmosphere, no changes are observed in the thermal degradation range and only a reduction is documented in the onset of degradation temperature. Considering important role of onset of degradation temperature, activation energy of starting of degradation temperature is calculated utilizing Kissinger-Ozawa model in both oxygen and nitrogen atmospheres. Results showed that activation energy of degradation reaction is decreased by ∼ 20 kJ/mol. This decrease is owing to the release of modifiers from the nanoparticles.